中化建國際 受招標人委托對下列產品及服務進行國際公開競爭性招標，于2025-07-04在公告。
本次招標采用電子招標方式，現邀請合格投標人參加投標。
1、招標條件
項目概況:中海殼牌惠州聚碳酸酯項目PC裝置偏芯旋轉調節閥
資金到位或資金來源落實情況:已落實
項目已具備招標條件的說明:已具備
2、招標內容
招標項目編號:0704-2540JDCP0012
招標項目名稱:中海殼牌惠州聚碳酸酯項目PC裝置偏芯旋轉調節閥
項目實施地點:中國廣東省
招標產品列表(主要設備):
3、投標人資格要求
投標人應具備的資格或業績:對投標人的資格和業績要求：Requirements for Qualification and reference of Bidder: （1）資格要求 Requirements for Qualification of Bidder A．如果投標人為境內注冊公司，投標人需提供合法有效的企業法人營業執照、稅務登記證及組織機構代碼證或證照合一的營業執照，投標時需提供原件掃描件（原件備查）；如果投標人為境外注冊公司，需提供有效的公司登記注冊證明；A．The bidder within the customs territory shall provide valid independent legal person business license, tax registration certificate, organization code certificate, or combined certificate and business license. The scanned copy of the original shall be provided during bidding (the original copy for reference);The bidder outside the customs territory shall provide valid certificate to prove valid business registration certificate.B. 投標人應為本次投標所投產品的制造商。
如投標人為制造商同一集團負責銷售投標所投產品的全資子公司、控股子公司（投標人應提供制造商或其上級公司證明上述事項的證明文件），則視投標人為制造商。
不能再將此貨物同時授權給其他投標人參與投標，否則相關的所有投標將被拒絕。
The bidder shall be the manufacturer or agent of the bidding products.If the bidder is a wholly-owned subsidiary or holding subsidiary of the same group as the manufacturer responsible for sales of the bidding products, the bidder shall provide relevant evidence documents from the manufacturer or its superior company to prove the above matters, and in such case the bidder shall be deemed as the manufacturer. The bidding goods cannot be authorized to other bidders to participate in this bidding at the same time, otherwise all related bids will be rejected.C. 是否接受聯合體投標：否C. Joint Venture: Not AcceptedD. 未領購招標文件是否可以參加投標:不可以E. Bid without the bidding documents：NOT Allowed （2）資質要求Qualification Requirement投標產品制造商應取得覆蓋本次投標產品（18臺偏心旋轉閥的型號、口徑和壓力等級）且有效的TSX《特種設備型式試驗證書》。
Bidder shall provide manufacturer's “Special Equipment Type Test Certificate” within the validity period. The approval scope of the certificate shall covers the scope of this bidding （mode, calibration, pressure of the 18 sets eccentric rotary valve）. （3）業績要求Requirement for Bidder's reference:2015年1月1日至投標截止日（以合同簽署時間為準），投標人所投產品的制造商在中國境內至少具有1個應用于聚碳裝置，滿足單個合同供貨數量不少于10臺的氣動偏芯旋轉閥供貨業績，且此單個合同中至少1臺氣動偏芯旋轉閥的閥體尺寸不小于12寸。
From January 1st, 2015 to the deadline for submission of the bid (subject to the signing time of the contract), the manufacturer of the bid pneumatic eccentric rotary control valve shall have at least one supply contracts performance of pneumatic eccentric rotary control valve for PC Plant within P.R.China, and each supply performance contract shall include at least 10 pneumatic eccentric rotary control valves, with at least one set of the body size no less than 12 inches .投標人須按規定格式提交業績表，并提交相關業績證明文件。
業績證明文件包括但不限于：銷售合同復印件。
投標人所提交的業績證明文件必須至少體現以下內容：合同簽署時間、合同簽署頁（國內貿易合同應有雙方蓋章，國際貿易合同應有雙方簽字或蓋章）、制造商名稱、裝置名稱、貨物名稱（偏芯旋轉閥）、閥門尺寸、閥門型式（氣動）、閥門數量及用戶簽字或蓋章的到貨驗收材料。
若業績合同為年度協議，除提供年度協議外，還應提供相應的已到貨訂單，訂單內容或編號應與年度協議相關聯。
同一個年度協議下提供1個或以上的訂單及與訂單對應的到貨驗收材料均算為1個有效業績。
The Bidder shall furnish reference list in given form, and provide corresponding documentary evidence. The documentary evidence shall include but not limited to: copies of sales contract and 2) acceptance evidence of goods delivery. The reference evidence documents furnished by Bidder shall as least demonstrate the content as follows: Date of signing contract, contract signing page(domestic trade contracts should have seals from both parties, international trade contracts should have signatures or seals from both parties), name of manufacturer, name of the plant, name of goods(Eccentric Rotary Control Valve), valve size, valve type(pneumatic), quantity and acceptance evidence of goods delivery signed or sealed by the user.If the performance contract is an annual agreement, in addition to providing the annual agreement, corresponding received orders should also be provided, and the order content or number should be associated with the annual agreement. Providing one or more orders and corresponding acceptance evidence under the same annual agreement is considered as one valid performance.未提交業績證明文件，或通過所提供的業績證明文件無法認定滿足上述業績要求的，均視為無效業績。
If no documentary evidence furnished, or documentary evidence furnished can not demonstrate the above performance requirements, the relevant reference will be deemed invalid.
是否接受聯合體投標:不接受
未領購招標文件是否可以參加投標:不可以
4、
未在中國電力招標采購網（www.dlztb.com）上注冊會員的單位應先點擊注冊。登錄成功后的在 招標會員 區根據招標公告的相應說明獲取招標文件！
咨詢電話：010-51957458
手 機：18811547188
聯系人：李楊
QQ:1211306049
微信：Li18811547188
郵箱：1211306049@qq.com
來源：中國電力招標采購網
備注：欲購買招標文件的潛在投標人,注冊網站并繳納因特網技術及商務信息服務費后，查看項目業主，招標公告并下載資格預審范圍，資質要求，
招標清單，報名申請表等。為保證您能夠順利投標，具體要求及購買標書操作流程按會員區招標信息詳細內容為準。
編輯：mofcom
